HP Ml150 G6 – My first datastore

I don’t spend the amount of time on my home server as I’d like to. After a long day of sitting at my desk at work, dealing with production servers and everything super sensitive, I try to unwind a bit and work at a slow pace. My slow pace this week is my esx datastore.

I’ve spent the past couple of days thinking about how I want to setup the datastore that will contain my virtual machines. Initially I had the HP P410 RAID controller connected to two, WD Green drives in a RAID-o array. I was satisfied with that at first because the drives will run at SATA 2 speeds and hopefully RAID-0 will improve the performance ever so slightly.

Then I got thinking, my goal is to setup a ‘corporate’ environment at home. Multiple domain controllers, WSUS, Sophos Firewall, play with SNMP and PRTG monitoring but that made me realize that I don’t want to build a large environment that will go to waste if one drive was to fail. My ultimate goal is to move onto SSDs and use a more complex raid (RAID 6 or 10) for this server, but that’s down the line when I free up funds and more resources.

Last night, I decided to delete the RAID-0 array, pull out the WD Green drives and install two new-to-me 1TB SAS drives and proper cabling (Mini SAS SFF-8087 to SFF-8482+15P). I briefly talked about the cabling in this previous post.

I purchased a few SAS drives from ebay, not knowing exactly which one would be compatible with the HP P410 raid controller. Most of what I can find on the internet, points to the HP P410 controller not being picky with the brand of drives.

Initially I installed a two Seagate 1TB SAS ST1000NM0045 drives but the RAID utility would not want to see the drives. Thinking it’s the cable, I replaced it with a spare but the outcome was still the same. I did a bit of searching around and found a discussion on serverfault.com, regarding HP Proliant not recognizing EMC SAS drives. One user points out that some drives can be formatted in 520-byte sectors vs 512-byte sectors that you would normally get on normal PC/server class drives.

I haven’t tested that theory but I will. With that said, I decided to install two other drives, which surprisingly worked right away.

The drives that are functioning fine with the HP P410 raid controller are:

  • Dell Enterprise Plus MK1001TRKB
  • Seagate Constellation ES.3 ST1000NM0023

Now that I have two drive’s in a RAID-1 array, I loaded into VMware ESXi and proceeded to add a the new VMFS datastore. Adding the datastore gave me some issues, which I’ve documented here.

I have in my possession two SAMSUNG Data Center Series SV843 2.5″ 960GB drives that I purchased about 2 years ago from newegg for a fantastic price. I’ve toyed with using them in this build, but the SSD drives would only work at SATA 2 speeds. Maybe I’ll use them to house my personal data, but I should purchase a few more to do RAID-6 or RAID 1+0.

Regardless of my direction, I am still working out the kinks in my homelab environment.

Ideally, I’d like to find a cheap or reasonably priced NAS that has iSCSI ports. I then would be able create two datastores on the NAS, one for extended VM storage if required and the other for user data.

Thanks for reading.

Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *