Posted on No Comments on Error when trying to add ESXi host to VCSA

Error when trying to add ESXi host to VCSA

“Cannot decode the licensed features on the host before it is added to vCenter Server. You might be unable to assign the selected license, because of unsupported features in use or some features might become unavailable after you assign the license.”

That is the exact message I received this past weekend when I was trying to add my Lenovo M93p Tiny ESXi host(s) to my vCenter cluster.

A quick explanation is needed here. While I’m waiting for some networking gear to arrive from eBay, I’ve decided to configure my Lenovo M93p Tiny ESXi hosts together using my VMUG advantage license and install VCSA onto them. The goal is to build a lab/cluster at home and utilize all of the VCSA functionalities.

If you are just reading my post for the first time, read this for some further insight.

Anywho, for each of my three Lenovo M93p Tiny computers, I initially installed VMware vSphere 6.7 that I obtained from myVMware.com.

My hosts are using a very basic IP addresses. 192.168.1.250/251/252.

On ESXI01 (192.168.1.250), I started the process to install the VMware VCSA appliance on said host. When the VCSA configuration was complete, I made sure I had the appropriate license applied to VCSA and under license management.

When I would try to add my host(s) to VCSA, I would get the message that I posted at the top of this post.

“Cannot decode the licensed features on the host before it is added to vCenter Server. You might be unable to assign the selected license, because of unsupported features in use or some features might become unavailable after you assign the license.”

I couldn’t figure it out. Initially I thought this was a license issue but it didn’t make sense. When I installed VCSA on a clients production environment in the past, I never ran into this. Confused, I started searching Google for some suggestions.

Some results pointed to a time specific issue(NTP) or even license related. Both weren’t the case in my situation so I continued my search. Eventually I found something that was quite interesting regarding versions of ESXi and VCSA. The VCSA version cannot be older than the vSphere ESXi version.

This was my best bet as I recalled that my ESXi hosts were on version 6.7 while the VCSA appliance I was putting on was at 6.5. I configured my VCSA with the IP of 192.168.1.253 for the time being.

Why was I trying to put on an older version? Simply to learn and upgrade it. Try to mimic live production tasks and practice at home.

This afternoon I went ahead and downloaded from VMUG advantage the ISO for VMware ESXi 6.0 and VMware VCSA 6.5. This way I can install those, get VCSA setup and after a few days of playing with updates/patches, perform upgrades.

I’m writing this post because it was successful. The issue that I was initially experiencing was most likely due to the version difference.

  • VMware VCSA version 6.5

I know this isn’t an overly technical post but I wanted to write this up in case I ever forget and have to reference this in the future or somebody else may run into this.

Lastly I’d like to recommend the VMware 70785 Upgrade Path and Interoperability page for referencing which versions of VMware products play nice. It helped me confirm that re-configuring my hosts for version 6.0 will play nice with VCSA 6.5.

Thanks for reading!

Posted on No Comments on Adding a vCenter 6.7 license

Adding a vCenter 6.7 license

Hello, it’s me again.

From my recent blog post regarding setting up vCenter, I had difficulties locating the area to apply the vCenter license.  From what I found on the internet, it was referenced that you should go to the Host that contains the vCenter/VCSA VM, click on the VM and click on Configure. Maybe VMware changed it in version 6.7 but I could not find the same area for license registration under the VM itself.

Under the VCSA VM –> Configure –> Settings, I should see a ‘License’ section. I could not find anything of that sort.  I logged in as my admin account and my personal admin account, both that have the license role and that feature was still not available.

Frustrated, I did some looking around within the vSphere client and I found the area to do this.

You need to click on the ‘top’ FQDN vCenter identifier on the left hand side of the window, which houses your Datacenter and the nodes inside.

Once you click on it, you will see the following,

As you see, now selecting the VCSA and going to the Configure section and under Settings, we now see Licensing as an option. Now in my case, I’ve already applied the license but I’m going over where I went to do this.

You would select the Assign License button to proceed with entering your key into vCenter.

Under the Assign License window, you will have two options. To select an existing license or new license. You can import the license from your License section from the admin page or you can type in your license if you haven’t already done so.   I’ve already uploaded my licenses to the Administration License section, which I will show next.

Now what I have done initially was gone into the Administration section –> Licensing –> Licenses and typed in the VMware vCenter Server 6  Essential vCenter license key.  When I did this, the usage of the vCenter license was set to 0 and capacity was set to 1.  This was because I never assigned the license to the vCenter itself.  I did this in the Assign License window as seen above.

The last and final screenshot above shows the Administrator License window which identifies my License(s) and their state and capacity.

To note: When I was in the process of importing each host, the license for those hosts registered automatically here.  I did not have to enter the VMware vSphere 6 Essentials Plus License.  Those just followed with each host/node into vCenter.